Posted by admin | Posted in Model Railway | Posted on 09-02-2010
Tags: agricultural,, bottom discharge hopper, chemical, discharge,, feeder, tanks
Looking For Discharge Hopper ? Then This is Where You Want to Be
 |
 LogixPro 500 RS Logix 500 Training NEW  US $69.99
|
 TWH C Harvey Ready Mix Oshkosh S Series Front Mixer NEW US $219.95
|
 DL Tech cap elevator model DLCAP V8 US $7,500.00
|
 Farmomac cap elevator US $5,500.00
|
 LARGE INCLINED CHIP CONVEYOR US $315.00
|
 WOODS 5000 BRUSH CHIPPER US $3,488.00
|
 Moriyama 2TE500 120 Conical Twin Screw Extruder US $125,000.00
|
 NEW 4 Hydraulic feed tractor mounted wood chipper shredder US $4,300.00
|
 HO 1 87 sc Proto 2000 DRGW High Side Covered Hopper Kit US $9.99
|
 12 X 12 MAC MD 75 ROTARY AIRLOCK W VENT HOPPER US $4,500.00
|
 10 X 10 MAC WRMD40 ROTARY VALVE PACKAGE US $5,000.00
|
 10 X 10 MAC ROTARY AIRLOCK VALVE PACKAGE MD 40 US $5,000.00
|
 12 X 12 ROTARY VALVE AIRLOCK PACKAGE MAC MODEL MD75 US $5,500.00
|
 TWH Cemstone Oshkosh S Series Front Discharge Mixer US $219.95
|
 15 CUBIC FOOT STAINLESS STEEL HOPPER BIN US $1,300.00
|
 1 50 TWH Sword Oshkosh S Series Cement Mixer Truck NZG US $130.99
|
 TWH Carew Concrete Supply CoOshkosh S Series Front US $219.95
|
 TWH Green Gold Concrete Oshkosh S Series Front Disc US $219.95
|
 932 41251 PS2 CD 4427 High Side Covered Hopper WC US $26.00
|
 932 41254 PS2 CD 4427 High Side Covered Hopper IMCX US $26.00
|
 932 41255 PS2 CD 4427 High Side Covered Hopper IMCX US $26.00
|
 932 41256 PS2 CD 4427 High Side Covered Hopper IMCX US $26.00
|
 932 41257 PS2 CD 4427 High Side Covered Hopper WS US $26.00
|
 932 41260 PS2 CD 4427 High Side Covered Hopper CP US $26.00
|
 932 41263 PS2 CD 4427 High Side Covered Hopper HJPX US $26.00
|
 932 41264 PS2 CD 4427 High Side Covered Hopper HJPX US $26.00
|
 932 41265 PS2 CD 4427 High Side Covered Hopper HJPX US $26.00
|
 932 41268 PS2 CD 4427 High Side Covered Hopper AEX US $26.00
|
 932 41269 PS2 CD 4427 High Side Covered Hopper BNSF US $26.00
|
 932 41270 PS2 CD 4427 High Side Covered Hopper BNSF US $26.00
|
 Canadian National round hatch Cylindrical hopper368416 US $27.35
|
 PLC Simulators PLC Training Manuals and more DVD US $10.30
|
 New MACCO Micra Super Automatic Espresso Machine US $4,995.00
|
 45 Gallon Stainless Hopper Tank Dry Product Feeder with SS Filter Screen US $750.00 |
 REMCON PLASTIC FRONT DISCHARGE HOPPER US $500.00
|
 Dustin Mizer Powder Duster For Diatomaceous Earth US $42.00
|
 MDC UP 50 5 Bay Rapid Discharge Hopper Black 34000 US $6.50
|
 HO Scale CORNERSTONE BLACK TOP ASPHALT HOT MIX PLANT w ROTARY KILN KIT US $99.95
|
 HERB GRINDER TABLE TOP HAND CRANK PEPPER COFFEE US $60.00
|
 VR FRANK CASILIO R MACK CEMENT MIXER First Gear US $89.95
|
 MATCH SET 3 KONCRETE R MACK CEMENT MIXERS First Gear US $199.95
|
 Atlas HO 1403 1 4650 3 Bay Centerflow Hopper NYC US $21.00
|
 Atlas HO 1403 2 ACF 4650 3 Bay Centerflow NYC US $21.25
|
 Atlas HO 1404 1 ACF 4650 3 Bay Centerflow Thiele US $21.25
|
 Atlas HO 1405 1 ACF 4650 3 Bay Centerflow Englehard US $21.25
|
 Atlas HO 1405 2 ACF 4650 3 Bay Centerflow Englehard US $21.25
|
 Atlas HO 1410 1 ACF 4650 3 Bay CF Hopper Frenchs US $22.25
|
 Atlas HO 1410 2 ACF 4650 3 Bay CF Hopper Frenchs US $22.25
|
 IRON ORE Load for Micro Trains 3 Bay Ortner Hopper HAY BROTHERS US $2.75
|
 FILL DIRT Load for Micro Trains Ortner Hopper HAY BROTHERS US $2.75
|
 Syntron Vibratory Bulk Parts Feeder US $1,000.00
|
Pharmaceutical Quality - Containment Blending
Overview
Containment blending is a concept pioneered in the 1950’s by TOTE® Systems as a response to the needs expressed by customers in all facets of the bulk powder industry. Product change over, clean up/sanitation, cross-contamination, blend quality and extensive blend times were a few of the inherent short comings with the technologies that existed inspiring the search for a better blending system. Containment blending eliminates these concerns in a simple, straightforward design that utilizes the customer's in-house or shipping containers.
The concept is simple. The same Intermediate Bulk Container (IBC) that is used for shipping and storage is also used for blending. A typical tumble/blender consists of a cradle and a pedestal support. The cradle is the structure that holds and rotates the entire IBC. The cradle is either single or tandem supported by a pedestal base and is skewed l5° to 30° on the rotational axis. This arrangement holds the IBC level with the floor for loading and produces the blending angles required by the IBC during rotation. This angle puts the straight wall sections at continuously changing opposing angles throughout the revolution. This action produces a cross-flow effect that homogenizes the batch.
The majority of tumble/blenders in use today are stand-alone units that are loaded by means of a fork truck. A small but growing percentage of units load the IBC's from floor level by a pallet jack or they are wheeled into the unit if the IBC is mounted on casters. The following is a typical scenario of how containment blending is accomplished in a stand-alone installation:
The operator fills the IBC with ingredients in correct proportions. The IBC may be put in storage or immediately loaded into the tumble blender. Once loaded, the operator selects the duration of the blend cycle and presses the start button on the unit. The blender then rotates the entire IBC for the predetermined interval and signals the operator upon completion.
Growing in demand are tumble/blenders that are integrated into a fully automated system. The following is a typical scenario of a containment blending system integration:
The IBC is retrieved from storage and is typically filled at an automated filling station. It is then transported by AGV or conveyor to the blender and is automatically loaded. It is then blended, unloaded, and transported to storage or to an IBC discharge station.
Benefits of Containment Blending
Containment blending offers the following advantages over conventional blending equipment:
1. Total product containment.
2. Zero clean up required on blender.
Container tumble blenders easily accommodate different batch formulations because the product contacts only the IBC allowing immediate product change over and zero blender clean up.
3. Reduced blend times in most instances.
4. Less ingredient segregation.
Eliminates the need to remove the batch from the transport and blending container. Batch transferring by nature is a process that tends to segregate ingredients.
5. Increased product containment.
Less product transfer results in reduced chance of spillage or contamination by airborne substances.
6. No cross-contamination.
The product never contacts the blender and does not require transfer to and from the blending container.
7. Increased process flexibility.
An infinite number of product formulations can easily be blended in the same unit because the blender never contacts the product.
8. Ideal for integration into an automated process.
Designing a Containment Blending System
Successful blending depends on the following factors:
1. IBC Fill Level
The IBC should typically be filled from 50% to 80% of its maximum “waterfill" capacity. Ideally a 65% fill volume should be targeted, which allows room in the IBC or the blending action to occur yet does not unnecessarily waste IBC capacity.
2. IBC Design
The Side Door IBC was developed in the early 1940's by TOTE® Systems and remains essentially unchanged from the original design that pioneered the entire IBC industry. This design is basically a rectangular box with typically a 42" x 48" base dimension. The ideal height proportion is in the range of 1.3 - two times the widest base dimension. The 42" x 48" base configuration is the most common although other base sizes can be successfully blended as long as the width-to-length base proportions are within 25%.
3. Hopper Type IBC's
Hopper Type IBC's are also well suited to containment blending. The guidelines in design are the same as those for side door IBC's except for the height proportions. The upper sidewall of the IBC should be a minimum of one-half and a maximum of two times the height of the hopper section. Also, the IBC is best if it is symmetrical (i.e. bottom center discharge). Keep in mind that even if the IBC proportions do not precisely fit the guidelines put forth here, good blending will still most likely occur.
4. Batch Size
Typical batch sizes range from less than ten cubic feet to eighty cubic feet and over. Blend quality is generally not affected by batch size providing the IBC is properly designed to the intended batch volume.
5. Blending Speed
The blender's rotational speed is a variable that impacts both blend time and quality. The inevitable question asked by those purchasing new tumble/blenders is at what speed should the unit turn their product. The manufacturer can approximate a speed range but due to the various combinations of bin size, design, and batch ingredients it is best to determine the ideal blending speed by performing full scale or laboratory testing. One indicator of excessive blending speed is the presence of a thumping sound every half revolution. This indicates that the product is becoming airborne and impacting on the opposing wall of the IBC. Optimal speed is achieved when the product in the IBC flows in a continuous "wave" pattern. With some experience, this flow pattern becomes easily recognizable. Since the product flow cannot easily be seen in a product environment, a quarter scale lab blender with a transparent bin is used to predict the full size blend speed and the level of blend quality that may be achieved with each specific formulation. Users that have various batch formulations or continually change their formulations generally have purchased a lab blender scaled to their full size unit for this purpose.
6. Blending Duration
The determination of the proper blending time of a batch is another variable that is important to calculate and is best determined by empirical testing. This setting is found by blending a full-scale batch and sampling blend quality at frequent intervals until the batch is fully homogenized. One need not blend longer than is required because in rare instances the ingredients may tend to segregate back out after a homogeneous blend has been achieved. In most blending applications the blend cycle time is between four to twelve minutes.
ONCE THE ABOVE FACTORS HAVE BEEN DETERMINED, BLENDS ARE VERY CONSISTENT AND ACCURATELY REPEATED.
Product Characteristics
Products suitable for containment blending generally, but net necessarily, require the following characteristics.
1. Close Specific Gravity
Ingredients with close specific gravity tend to require shorter blend times and produce superior blend results.
2. Similar Relative Particle Sizes
Ingredients with similar particle sizes tend to require shorter blend times and produce superior blend results.
3. Moisture Content
High moisture powders when blended with low moisture powders tend to adhere to themselves and form into balls. These materials may require special preparation prior to or during introduction to the IBC or require an intensifying mechanism integral to the IBC. Good blends are easiest achieved when blending dry powders with dry powders and moist powders with moist.
About the Author
Chris Ducic, Tote Systems, International. Tote Systems, a Fort Worth, TX company, is a world-wide leader in providing products and services related to powder processing, material handling and containment systems. Learn more about Tote Systems at http://www.ToteSystems.com, call toll free (888) 862-6176, or email them at sales@ToteSystems.com.