Posted by admin | Posted in Model Railway | Posted on 07-04-2010
Tags: howto, model, modeling, models, tips
Looking For Styrene Tips ? Then This is Where You Want to Be
![]() |
![]() O scale 1895 storefronts card kit 148 paper model US $4.95
|
![]() O scale 1896 storefronts card kit 148 paper model US $4.95
|
![]() O scale 1897 storefronts card kit 148 paper model US $4.95
|
![]() LIQUID 30 MINUTE EPOXY ADHESIVE CEMENT GLUE 9 oz BOTTLE US $24.95
|
![]() Mosaic Acrylic UV Gel French Nail Form Tips 60pcs 513C US $6.99
|
![]() SUNRIZEWHOS STICKIN ITIMPORT 45PSFRANCE1982 US $9.99
|
![]() MARTY WILLSON PIPERShes King Promo Sampler 12 Vinyl US $6.99
|
![]() Evergreen Black Styrene Sheets 03x8x21 4 EVG9114 US $8.99
|
![]() Evergreen 9114 Black Sheet 030x8x21 4 US $8.38
|
![]() Plastruct G Patio Stones 2 PLS91593 US $8.99
|
![]() PRIVY OUTHOUSE HOn30 HOn3 fsm Ron Morse Productions US $4.89
|
![]() COLLAPSED BEE HIVE KILN HO HOn3 Morse Productions US $12.95
|
![]() Evergreen Black Styrene Sheets 08x6x12 EVG9517 US $3.49
|
![]() Evergreen Black Styrene Sheets 04x8x21 3 EVG9115 US $8.99
|
![]() LEAN’IN SHED KIT FSM HO HOn3 Ron Morse Productions US $6.89
|
![]() NEW Minicraft 1 3 Honda 750 Engine 11202 NIB US $56.99
|
![]() NEW Hobbico Model Maker Plastic CA Thin 1 2 oz HCAR3415 NIB US $4.49
|
![]() NEW Hobbico Model Maker Plastic CA Medium 1 2 oz HCAR3417 NIB US $4.49
|
![]() THE COUNTRY GAS STORE KIT CHOOCH FSM HO HON3 HON30 MIB US $84.95
|
![]() LK 9 Eye Catching STICKY EYES FREE AUS POST US $10.67
|
![]() Mosaic Acrylic French Nail Form Tips 60pcs US $14.99
|
![]() German Made Woodcarving Gouges Your Choice US $15.00
|
![]() PRECISION STEPPED SHAKE SHINGLES Peel n Stik S Sn3 Sn2 164 NEW US $9.89
|
![]() Hobbico Plastic CA Thin 1 2 oz HCAR3415 US $4.49
|
![]() Hobbico Plastic CA Medium 1 2 oz HCAR3417 US $4.49
|
![]() Minicraft 11202 1 3 Honda 750 Engine US $60.66
|
![]() RARE OLD GOLD BOX SET OF 7 SINGLES 10 X 7 SINGLES STAMPED A ON ONE SIDE US $15.78
|
Ice Dams & Water Damage Prevention
As winter advances through cycles of freezing and thawing, buildings and homes experience ice buildup and roof damage. In general, ice dams are formed when attic heat moves up to warm the roof and melts snow at or near the ridge. Snow melts, runs downward and hits the edge of the cold roof, resulting in re-freezing snow. These cycles cause ice to accumulate and back up under shingles. Damage appears in the form of soaked insulation, stained, cracked and damaged sheet rock, damp, smelly, rotting wall cavities and stained, blistered and peeling paint.
Preventing Ice Dams
To prevent an ice dam, don't heat the roof, keep it cold. That way, the snow on the roof eventually dissipates without making large amounts of meltwater. The underside of the roof deck should not exceed 30 F. The best way to maintain low temperatures is by ensuring that there is adequate insulation and sealing gaps that let warm air pass into the attic from the house. The attic must also be ventilated, so that cold air is introduced into it and heated air escapes rapidly. Some remodeling contractors are under the impression that heat passing through the attic helps prevent ice dams, when just the opposite is true. Although excess heat moving from the attic through the roof rapidly melts snow, once the meltwater touches the cold eaves, it quickly freezes and forms an ice dam.
If you have a furnace in the attic, it may not be possible to prevent ice dams. Increased insulation, however, should help. First, insulate the areas between the roof rafters. It is important to keep an air space between the roof deck and the insulation in order to prevent a condensation buildup that can delaminate the roof deck. Prior to insulating, install polystyrene rafter air channels, which are available at home centers. Next, lay insulation blankets over the furnace's heating ducts to help reduce the heat buildup in the attic. If there's a hatchway into the attic, build a cover for it out of rigid poly-styrene insulation.
If the gable and ridge vents do not generate sufficient air movement to dissipate the heat, you will need a motorized vent at one end of the attic to exhaust the heat, and an adequately sized vent on the opposite end of the attic to draw in cold air from the outside.
Check your home carefully when ice dams form. Investigate even when there doesn't appear to be a leak. Look at the underside of the roof sheathing and roof trim to make sure they haven't gotten wet. Check the insulation for dampness. And when leaks inside your home develop, be prepared. Water penetration often follows pathways difficult follow. Don't just patch the roof leak. Make sure that the roof sheathing hasn't rotted or that other less obvious problems in your ceiling or walls haven't developed. And then detail a comprehensive plan to fix the damage. But more importantly, solve the problem.
If you experience water damage that requires a water damage/flood restoration expert, please contact Advanced Restoration at (800) 693-6263. Advanced Restoration is a full service property damage restoration company that can respond 24/7 to your water damage situation. We use state-of-the-art equipment to handle structural drying. Our professional staff is also available to handle mold situations that may occur as a result of a water loss.
Our service area includes Nassau County, Suffolk County and the New York boroughs. Enjoy the snowfall and stay dry!
About the Author



US $5.95






































































